Hot water

Heat Pump Hot Water Cost in Victoria: 2026 Price Guide

What Victorian households can expect to pay for a heat pump, how rebates affect the quote and what it costs to run.

All Electric Homes

In one published Melbourne example, a 270 L heat pump costs $3,069–$3,569 supplied and installed, including GST and two incentives already factored in. With the full $1,000 Solar Victoria rebate, eligible households in that example would pay $2,069–$2,569.

That's a useful starting point. The price for your home comes down to which unit you need, where it will go, what your plumber and electrician need to do, and which incentives you actually qualify for.

What does a heat pump cost to install?

Here are three published examples from the Bayside Energy Upgrades program, where systems are supplied and installed by All Electric Homes:

SystemInstalled price before Solar Victoria rebateWith full applicable Solar Victoria rebate
Aquaplus 200 L$2,555–$3,055$1,555–$2,055
Aquaplus 270 L$3,069–$3,569$2,069–$2,569
Reclaim Energy 315 L, eligible locally made model$6,735–$7,235$5,335–$5,835

These are Bayside program examples, not Victoria-wide prices. All figures include GST. Both columns already include the federal STC incentive and a Victorian Energy Upgrades (VEU) discount based on replacing gas hot water. The standard installation includes removing and decommissioning an existing ground-mounted tank. Your final price may differ if you’re replacing a different system or the site needs extra work.

What changes the price?

  • The unit and tank size. Think about how many showers your household takes back-to-back, whether you regularly fill a bath and how quickly the system can heat more water. A bigger tank can cost more, but size alone doesn’t explain the price gap between models.
  • Plumbing and placement. Reusing a suitable spot is usually simpler than moving the tank. A relocation can mean longer pipe runs, new drainage or a new base. The installer also needs to check access, airflow and noise near bedrooms or neighbours.
  • Electrical work. Ask whether the quote includes the required circuit and wiring. Extra cable, a new route or a switchboard upgrade can change the total. A heat pump does not automatically mean you need a new switchboard.
  • Removal and making good. Confirm who removes the old unit, caps the gas line if relevant and deals with any patching. Capping the line to one appliance is separate from disconnecting the property's gas supply.

For more on sizing and placement, see Solar Victoria’s heat pump planning guide.

Which rebates and discounts can reduce the cost?

IncentiveWhat to check on your quote
Solar Victoria hot water rebateUp to $1,000 for other eligible products or $1,400 for an eligible locally made model. The rebate is 50% of the eligible product price after other discounts, up to the relevant cap. Check the household, property and product rules.
Victorian Energy Upgrades (VEU)The discount depends on the existing system, the approved replacement and the accredited provider’s quote. Ask for the dollar amount for your job rather than assuming every replacement gets the same discount.
Federal STCsEligible heat pumps can attract an upfront discount if you assign the certificates to a registered agent. Check whether it’s already included in the price.

Check Solar Victoria eligibility, VEU hot water discounts and federal heat pump STCs. If you’re comparing two quotes, compare the final amount you’ll pay and check that both quotes assume the same incentives. Don’t subtract a discount twice.

How much does a heat pump cost to run?

Here’s a worked example for the same amount of hot water. It assumes 2,500 kWh of heat delivered per year, electricity at 30¢/kWh and gas at 3.5¢/MJ. These are example inputs, not average Victorian tariffs or a savings promise.

SystemExample efficiency assumptionAnnual energy cost
Heat pump3 units of heat per unit of electricity$250
Standard electric resistance1 unit of heat per unit of electricity$750
Gas hot water80% of gas energy converted to heatAbout $394

This simplified comparison excludes supply charges, solar and system-specific losses. If you still use gas for heating or cooking, your gas supply charge usually stays. If hot water is your last gas appliance, check what it would cost to close the gas account or permanently abolish the connection before counting that extra saving. If you have rooftop solar, scheduling the heat pump during the day may reduce grid use; allow for any feed-in credit you would otherwise earn.

Why can the final quote differ from the online estimate?

All Electric Homes’ in-house plumbers and electricians coordinate the job through one staged quote. The online estimate assumes a standard installation. Selecting limited access flags it for our team but doesn’t change the instant figure. A site assessment confirms where the tank can go, what can be reused and whether extra plumbing or electrical work is needed.

When you compare the final quote, look for three things: the unit and standard installation, itemised site extras, and the incentives applied to your job.

Thinking about replacing your hot water system? Use the free All Electric Homes upgrade calculator for an indicative estimate for your home.